Functionally mediated cranial allometry evidenced in a genus of rock-wallabies.

In assessments of skeletal variation, allometry (disproportionate change of shape with size) is often corrected to examine size-independent variation for hypotheses relating to function. However, size-related trade-offs in functional demands may themselves be an underestimated driver of mammalian cranial diversity. Here, we use geometric morphometrics alongside dental measurements to assess craniodental allometry in the rock-wallaby genus Petrogale (all 17 species, 370 individuals). We identified functional aspects of evolutionary allometry that can be both extensions of, and correlated negatively with, static or ontogenetic allometric patterns. Regarding constraints, larger species tended to have relatively smaller braincases and more posterior orbits, the former of which might represent a constraint on jaw muscle anatomy. However, they also tended to have more anterior dentition and smaller posterior zygomatic arches, both of which support the hypothesis of relaxed bite force demands and accommodation of different selective pressures that favour facial elongation. By contrast, two dwarf species had stouter crania with divergent dental adaptations that together suggest increased relative bite force capacity. This likely allows them to feed on forage that is mechanically similar to that consumed by larger relatives. Our results highlight a need for nuanced considerations of allometric patterns in future research of mammalian cranial diversity.

Facing the facts: adaptive trade-offs along body size ranges determine mammalian craniofacial scaling.

The mammalian cranium (skull without lower jaw) is representative of mammalian diversity and is thus of particular interest to mammalian biologists across disciplines. One widely retrieved pattern accompanying mammalian cranial diversification is referred to as 'craniofacial evolutionary allometry' (CREA). This posits that adults of larger species, in a group of closely related mammals, tend to have relatively longer faces and smaller braincases. However, no process has been officially suggested to explain this pattern, there are many apparent exceptions, and its predictions potentially conflict with well-established biomechanical principles. Understanding the mechanisms behind CREA and causes for deviations from the pattern therefore has tremendous potential to explain allometry and diversification of the mammalian cranium. Here, we propose an amended framework to characterise the CREA pattern more clearly, in that 'longer faces' can arise through several kinds of evolutionary change, including elongation of the rostrum, retraction of the jaw muscles, or a more narrow or shallow skull, which all result in a generalised gracilisation of the facial skeleton with increased size. We define a standardised workflow to test for the presence of the pattern, using allometric shape predictions derived from geometric morphometrics analysis, and apply this to 22 mammalian families including marsupials, rabbits, rodents, bats, carnivores, antelopes, and whales. Our results show that increasing facial gracility with size is common, but not necessarily as ubiquitous as previously suggested. To address the mechanistic basis for this variation, we then review cranial adaptations for harder biting. These dictate that a more gracile cranium in larger species must represent a structural sacrifice in the ability to produce or withstand harder bites, relative to size. This leads us to propose that facial gracilisation in larger species is often a product of bite force allometry and phylogenetic niche conservatism, where more closely related species tend to exhibit more similar feeding ecology and biting behaviours and, therefore, absolute (size-independent) bite force requirements. Since larger species can produce the same absolute bite forces as smaller species with less effort, we propose that relaxed bite force demands can permit facial gracility in response to bone optimisation and alternative selection pressures. Thus, mammalian facial scaling represents an adaptive by-product of the shifting importance of selective pressures occurring with increased size. A reverse pattern of facial 'shortening' can accordingly also be found, and is retrieved in several cases here, where larger species incorporate novel feeding behaviours involving greater bite forces. We discuss multiple exceptions to a bite force-mediated influence on facial proportions across mammals which lead us to argue that ecomorphological specialisation of the cranium is likely to be the primary driver of facial scaling patterns, with some developmental constraints as possible secondary factors. A potential for larger species to have a wider range of cranial functions when less constrained by bite force demands might also explain why selection for larger sizes seems to be prevalent in some mammalian clades. The interplay between adaptation and constraint across size ranges thus presents an interesting consideration for a mechanistically grounded investigation of mammalian cranial allometry.

Differential developmental rates and demographics in Red Kangaroo (Osphranter rufus) populations separated by the dingo barrier fence.

Decommissioning the dingo barrier fence has been suggested to reduce destructive dingo control and encourage a free transfer of biota between environments in Australia. Yet the potential impacts that over a century of predator exclusion might have had on the population dynamics and developmental biology of prey populations has not been assessed. We here combine demographic data and both linear and geometric morphometrics to assess differences in populations among 166 red kangaroos (Osphranter rufus)-a primary prey species of the dingo-from two isolated populations on either side of the fence. We also quantified the differences in aboveground vegetation biomass for the last 10 years on either side of the fence. We found that the age structure and growth patterns, but not cranial shape, differed between the two kangaroo populations. In the population living with a higher density of dingoes, there were relatively fewer females and juveniles. These individuals were larger for a given age, despite what seems to be lower vegetation biomass. However, how much of this biomass represented kangaroo forage is uncertain and requires further on-site assessments. We also identified unexpected differences in the ontogenetic trajectories in relative pes length between the sexes for the whole sample, possibly associated with male competition or differential weight-bearing mechanics. We discuss potential mechanisms behind our findings and suggest that the impacts of contrasting predation pressures across the fence, for red kangaroos and other species, merit further investigation.

Temporomandibular joint shape in anthropoid primates varies widely and is patterned by size and phylogeny.

The temporomandibular joint is the direct interface between the mandible and the cranium and is critical for transmitting joint reaction forces and determining mandibular range of motion. As a consequence, understanding variation in the morphology of this joint and how it relates to other aspects of craniofacial form is important for better understanding masticatory function. Here, we present a detailed three-dimensional (3D) geometric morphometric analysis of the cranial component of this joint, the glenoid fossa, across a sample of 17 anthropoid primates, and we evaluate covariation between the glenoid and the cranium and mandible. We find high levels of intraspecific variation in glenoid shape that is likely linked to sexual dimorphism and joint remodeling, and we identify differences in mean glenoid shape across taxonomic groups and in relation to size. Analyses of covariation reveal strong relationships between glenoid shape and a variety of aspects of cranial and mandibular form. Our findings suggest that intraspecific variation in glenoid shape in primates could further be reflective of high levels of functional flexibility in the masticatory apparatus, as has also been suggested for primate jaw kinematics and muscle activation patterns. Conversely, interspecific differences likely reflect larger scale differences between species in body size and/or masticatory function. Results of the covariation analyses dovetail with those examining covariation in the cranium of canids and may be indicative of larger patterns across mammals.

Craniofacial fluctuating asymmetry in gorillas, chimpanzees, and macaques.

OBJECTIVES: Craniofacial fluctuating asymmetry (FA) refers to the random deviations from symmetry exhibited across the craniofacial complex and can be used as a measure of developmental instability for organisms with bilateral symmetry. This article addresses the lack of data on craniofacial FA in nonhuman primates by analyzing FA magnitude and variation in chimpanzees, gorillas, and macaques. We offer a preliminary investigation into how FA, as a proxy for developmental instability, varies within and among nonhuman primates. MATERIALS AND METHODS: We generated 3D surface models of 121 crania from Pan troglodytes troglodytes, Gorilla gorilla gorilla, and Macaca fascicularis fascicularis. Using geometric morphometric techniques, the magnitude of observed FA was calculated and compared for each individual, sex, and taxon, along with the variation of FA across cranial regions and for each bilateral landmark. RESULTS: Gorillas and macaques exhibited higher and more similar magnitudes of FA to each other than either taxon did to chimpanzees; variation in magnitude of FA followed this same trend. No significant differences were detected between sexes using pooled data across species, but sex did influence FA magnitude within taxa in gorillas. Further, variation in FA variance across cranial regions and by landmark was not distributed in any particular pattern. CONCLUSION: Possible environmentally induced causes for these patterns of FA magnitude include differences in growth rate and physiological stress experienced during life. Developmental stability may be greatest in chimpanzees in this sample. Additionally, these results point to appropriate landmarks for future FA analyses and may help suggest more urgent candidate taxa for conservation efforts.

More Challenging Diets Sustain Feeding Performance: Applications Toward the Captive Rearing of Wildlife.

The rescue and rehabilitation of young fauna is of substantial importance to conservation. However, it has been suggested that incongruous diets offered in captive environments may alter craniofacial morphology and hinder the success of reintroduced animals. Despite these claims, to what extent dietary variation throughout ontogeny impacts intrapopulation cranial biomechanics has not yet been tested. Here, finite element models were generated from the adult crania of 40 rats (n = 10 per group) that were reared on 4 different diet regimes and stress magnitudes compared during incisor bite simulations. The diets consisted of (1) exclusively hard pellets from weaning, (2) exclusively soft ground pellet meal from weaning, (3) a juvenile switch from pellets to meal, and (4) a juvenile switch from meal to pellets. We hypothesized that a diet of exclusively soft meal would result in the weakest adult skulls, represented by significantly greater stress magnitudes at the muzzle, palate, and zygomatic arch. Our hypothesis was supported at the muzzle and palate, indicating that a diet limited to soft food inhibits bone deposition throughout ontogeny. This finding presents a strong case for a more variable and challenging diet during development. However, rather than the "soft" diet group resulting in the weakest zygomatic arch as predicted, this region instead showed the highest stress among rats that switched as juveniles from hard pellets to soft meal. We attribute this to a potential reduction in number and activity of osteoblasts, as demonstrated in studies of sudden and prolonged disuse of bone. A shift to softer foods in captivity, during rehabilitation after injury in the wild for example, can therefore be detrimental to healthy development of the skull in some growing animals, potentially increasing the risk of injury and impacting the ability to access full ranges of wild foods upon release. We suggest captive diet plans consider not just nutritional requirements but also food mechanical properties when rearing wildlife to adulthood for reintroduction.

Bolstering geometric morphometrics sample sizes with damaged and pathologic specimens: Is near enough good enough?

Obtaining coordinate data for geometric morphometric studies often involves the sampling of dry skeletal specimens from museum collections. But many specimens exhibit damage and/or pathologic conditions. Such specimens can be considered inadequate for the analyses of shape and are excluded from study. However, the influences that damaged specimens may have on the assessment of normal shape variation have only been explored in two-dimensional coordinate data and no studies have addressed the inclusion of pathological specimens to date. We collected three-dimensional coordinate data from the cranium and mandible of 100 crab-eating macaques (Macaca fascicularis). Tests typically employed to analyze shape variation were performed on five datasets that included specimens with varying degrees of damage/pathology. We hypothesized that the inclusion of these specimens into larger datasets would strengthen statistical support for dominant biological predictors of shape, such as sex and size. However, we also anticipated that the analysis of only the most questionable specimens may confound statistical outputs. We then analyzed a small sample of good quality specimens bolstered by specimens that would generally be excluded due to damage or pathologic morphology and compared the results with previous analyses. The inclusion of damaged/pathologic specimens in a larger dataset resulted in increased variation linked to allometry, sexual dimorphism, and covariation, supporting our initial hypothesis. We found that analyzing the most questionable specimens alone gave consistent results for the most dominant aspects of shape but could affect outputs for less influential principal components and predictors. The small dataset bolstered with damaged/pathologic specimens provided an adequate assessment of the major components of shape, but finer scale differences were also identified. We suggest that normal and repeatable variation contributed by specimens exhibiting damage and/or pathology emphasize the dominant components and shape predictors in larger datasets, however, the various unique conditions may be more influential for limited sample sizes. Furthermore, we find that exclusion of damaged/pathologic specimens can, in some cases, omit important demographic-specific shape variation of groups of individuals more likely to exhibit these conditions. These findings provide a strong case for inclusion of these specimens into studies that focus on the dominant aspects of intraspecific shape variation. However, they may present issues when testing hypotheses relating to more fine-scale aspects of morphology.

The anatomy of a crushing bite: The specialised cranial mechanics of a giant extinct kangaroo.

The Sthenurinae were a diverse subfamily of short-faced kangaroos that arose in the Miocene and diversified during the Pliocene and Pleistocene. Many species possessed skull morphologies that were relatively structurally reinforced with bone, suggesting that they were adapted to incorporate particularly resistant foods into their diets. However, the functional roles of many unique, robust features of the sthenurine cranium are not yet clearly defined. Here, the finite element method is applied to conduct a comprehensive analysis of unilateral biting along the cheek tooth battery of a well-represented sthenurine, Simosthenurus occidentalis. The results are compared with those of an extant species considered to be of most similar ecology and cranial proportions to this species, the koala (Phascolarctos cinereus). The simulations reveal that the cranium of S. occidentalis could produce and withstand comparatively high forces during unilateral biting. Its greatly expanded zygomatic arches potentially housed enlarged zygomaticomandibularis muscles, shown here to reduce the risk of dislocation of the temporomandibular joint during biting with the rear of a broad, extensive cheek tooth row. This may also be a function of the zygomaticomandibularis in the giant panda (Ailuropoda melanoleuca), another species known to exhibit an enlarged zygomatic arch and hypertrophy of this muscle. Furthermore, the expanded frontal plates of the S. occidentalis cranium form broad arches of bone with the braincase and deepened maxillae that each extend from the anterior tooth rows to their opposing jaw joints. These arches are demonstrated here to be a key feature in resisting high torsional forces during unilateral premolar biting on large, resistant food items. This supports the notion that S. occidentalis fed thick, lignified vegetation directly to the cheek teeth in a similar manner to that described for the giant panda when crushing mature bamboo culms.

The biomechanics of foraging determines face length among kangaroos and their relatives.

Increasing body size is accompanied by facial elongation across a number of mammalian taxa. This trend forms the basis of a proposed evolutionary rule, cranial evolutionary allometry (CREA). However, facial length has also been widely associated with the varying mechanical resistance of foods. Here, we combine geometric morphometrics and computational biomechanical analyses to determine whether evolutionary allometry or feeding ecology have been dominant influences on facial elongation across 16 species of kangaroos and relatives (Macropodiformes). We found no support for an allometric trend. Nor was craniofacial morphology strictly defined by dietary categories, but rather associated with a combination of the mechanical properties of vegetation types and cropping behaviours used to access them. Among species examined here, shorter muzzles coincided with known diets of tough, resistant plant tissues, accessed via active slicing by the anterior dentition. This morphology consistently resulted in increased mechanical efficiency and decreased bone deformation during incisor biting. Longer muzzles, by contrast, aligned with softer foods or feeding behaviours invoking cervical musculature that circumvent the need for hard biting. These findings point to a potential for craniofacial morphology to predict feeding ecology in macropodiforms, which may be useful for species management planning and for inferring palaeoecology.